ADSORB-it Products
Stormwater Treatment Solutions
Stock #AF11-2 & #AF11-5
The ADSORB-it filtration fabric is made from 100% recycled select fibers from the textile industry designed with the unique ability to allow the virtually unrestricted flow of salt or fresh water through the fabric at rates in excess of 100-gpm per square foot while retaining oils, oil sheen and oil borne contaminants in the fabric matrix.
“Available in 2’x 250′ & 5’x 250′ Rolls”
ADSORB-it Fabric Wipes
Stock #AF1515-50 & #AF1515-100 (50 & 100-ct. Packages)
ADSORB-it Fabric Wipes 15″x15″ squares. Reusable and made from 100% waste fibers – adsorbs between 15-20 times its weight in oil. Removes oils and oily sheen from water. Physically recovers oils and is ideal for soaking up small spills or wiping greasy-oily parts and equipment.
The ADSORB-it wipes are 100% recyclable (Green Product”) and can be laundered and reused or disposable through waste-to-energy incineration.
Product Available in 50-ct. & 100-ct. Packages
ADSORB-it Filter Socks
Stock #SFS8-10, #SFS8-5, #SFS5-57, #SFS6-8 & #SFS3-30
A heavy duty double-layer sock from ADSORB-it Filtration fabric for filtering silt, oil and oil sheen, or contaminants when flushing pipes, draining excavation pits, dewatering utility vaults and wet sumps and wet vaults.
The ADSORB-it Filter Socks are 100% recyclable (“Green Product”) that can be laundered and reused many times over or disposable through waste-to-energy incineration. Five standard sizes available in stock: 8″x10′, 8″x5′, 6″x8′, 5″x57″ & 3″x30″.
Need a custom filter sock? We can make the ADSORB-it Filter Socks in any size to fit your specific needs.
ADSORB-it Filter Boom
Stock #EFB-21-10
The ADSORB-it Filtration floating curtain boom is 21″ deep by 10′ long for use on any body of water to remove oil and oil sheen from the surface and subsurface. The floating curtain booms have a lower weighted chain ballast sown into the bottom and can be inter-connected to deploy across retention ponds or other bodies of water.
ADSORB-it Contour Ditch Boom
Stock #EDB24-5
The Contour Ditch Boom with a single layer of the ADSORB-it filtration fabric is 24″ deep by 5′ long for quick deployment in small waterways and ditches.
The Contour Ditch Boom has a a 3″ flotation boom across the top with ballast chain on the bottom to allow it to conform to the shape of the bottom of the ditch or waterway. Eleven feet of 1/4″ poly rope runs under the top boom section with 3′ free on each side for tie-off.
ADSORB-it Pipe Skirt
Stock #APS19-5
The ADSORB-it Pipe Skirt control oils, oily sheen and debris in sumps and catch basins, fits around inverted pipe elbows inside catch basins and oil-water separators. A double-layer of ADSORB-it Filtration Fabric enclosed on a 3″ diameter by 5′ long flotation boom with tendrils reaching 19″ deep.
The velcro and grommets at each end allow you to form the pipe skirt into a circle adjusting around various sizes of discharge pipes or hook multiple units together for other applications.
Ideal for use in catch basins, wet sumps and oil-water separators as a flotation skimmer to adsorb oils, oily sheen and oil-borne contaminants. Great for storm drains at automotive repair shops, retail gas stations and commercial fueling stations.
ADSORB-it Centipede
Stock #ETC10-5 Regular
Stock #ETC10-5 AM (*Antimicrobial Treatment)
The ADSORB-it Centipede will float on the water surface. The water filters through 9″ long tendrils on each side that provide maximum surface exposure for adsorbing oils, while allowing maximum water flow.
A double layer of fabric encloses a 3″ diameter by 5′ long flotation boom. The webbing loops and clip allows multiple units to be inter-connected.
The ADSORB-it Centipede is an ideal size for controlling oil and sheen in drainage ditches, zipper drains and discharge piping. Webbing runs the full length of the Centipede for added strength with a loop at each end and stainless steel clips for hooking multiple units together.
ADSORB-it Shore Guard ("Dumbo Surfer")
Stock #MSG5-10
The ADSORB-it “Dumbo Surfer” is designed for use in turblulent water and light surf to protect shorelines by capturing and retaining released oils, oil sheen and oil-borne contaminants.
Designed with four ears surrounding a boom gallery that holds a removable 5″ diameter by 10′ long floatation boom. It rolls in the surf or on the surface with the three ears always in the water. Interconnected units can be towed through an oil slick to remove the oil and sheen.
ADSORB-it Dewatering Filter Socks
Stock #DFS6-10 & #DFS8-10
The ADSORB-it filter socks are cost effective way to filter-out oils, oil sheen, oil borne contaminants and suspended solids from process discharge waters. Ideal for point source and non-point source pollution prevention.
The double-layer ADSORB-it filter socks range from 3″ diameter by 30″ long to 8″ diameter by 10′ long and will filter sediments while retaining oils and oil sheen contaminants in the fabric matrix. Our filter socks are reusable and the oils can be recovered for reuse or recycle by wringing or centrifuging. They can also be sent to a commercial laundry to be returned to a like-new condition.
ADSORB-it Hula Bug
Stock #EHB19-5
The ADSORB-it Hula Bug for use in tanks, sumps, vaults and can be used as a catch basin insert to adsorb oils, oily sheen and floating particulates. The flotation boom at the top allows the Hula Bug to float at the water surface to adsorb the oils and oily sheen, while the tendrils quiet the water for enhanced settling of solids.
*Available with Antimicrobial Treatment, the ADSORB-it Filtration Fabric is treated with a surface-bonded antimicrobial that kills bacteria by physical, rather than chemical means, so it is safe, will not leach out into the environment, and will remove fecal coliform from water.
ADSORB-it Mini-Surfer
Stock #EMS-24-30
The ADSORB-it Mini-Surfer, 24″ wide by 15″ high is designed for use in sumps and bilges. They have a grommet at each end and can be interconnected with heavy-duty nylon rope.
The 5″ diameter flotation boom can be removed to recover oils and to launder and reuse indefinitely. They are also disposable as fuel source through waste-to-energy incineration.
ADSORB-it Stormfilters (Catch Basin Filters)
Stock # ASF-1212 thru ASF-3648
The ADSORB-it Stormfilter is a catch basin insert (CBI) designed to adsorb and capture Petroleum Hydrocarbons (TPH), Fats, Oils and Grease (FOG) and oily sheen as well as other typical pollutants that flow into storm drains.
ADSORB-it Stormfilters Made to Fit Many Sizes & Configurations:
ASF-1212 – Fits 12″x12″ Small Catch Basin Structures
ASF-1824 – Fits 18″x24″ Catch Basin Structures
ASF-2024 – Fits 20″x24″ Catch Basin Structures
ASF-2424 – Fits 24″x24″ Catch Basin Structures
ASF-2525 – Fits 25″x25″ Catch Basin Structures
ASF-2436 – Fits 24″x36″ Catch Basin Structures
ASF-2448 – Fits 24″x48″ Catch Basin Structures
ASF-3030 – Fits 30″x30″ Catch Basin Structures
ASF-3036 – Fits 30″x36″ Catch Basin Structures
ASF-3648 – Fits 36″x48″ Catch Basin Structures
“Custom Sizes Can Be Designed & Manufactured to your Specifications”
ADSORB-it External Catch Basin Filter Berms
Stock #CBFB 3-7.5
The ADSORB-it external catch basin filter berm is ideal for preventing the mobilization of pollutants such as sediment, debris and oils from directly impacting storm drains and surface drainage areas. The ADSORB-it filter berm fits both 18″x24″ and 20″x24″ catch basin grates and measures 3.75′ long by 1′ wide.
The top of the Filter Berm contains a 4″ filter sock allowing storm water to flow through the fabric matrix while keeping sediment and debris out of the drainage structures. The ADSORB-it catch basin filter berms can also be custom made longer (5′ & 6′) to fit around larger type inlet drainage structures and is great for use in catch basins at construction sites or areas where heavy vegetation or landscape debris exist.
ADSORB-it Filtration Products
